The adapter I shared has no solder except that which you put into it. It solders into place just fine with a little flux, I’ve had 0 issues in ~20 games from this.
Be sure to clean your iron tip, I had a little bit of difficulty on the first one I did because I have had the same iron tip for like 10 years. A $2 replacement made life much easier. Probably also could have just hit it with sand paper. And double-check polarity on the connection points - watch a couple of YouTube videos to confirm you’ve got +/- right. I think it’s wonky on some carts.
The ones that are soldered and often suck are the ones OP posted. Be sure to check the battery voltage before you install those ones because they use cheap batteries and duds are common.
I’ve also seen people go the cave man approach and just un-solder/pry off only the battery (from the attached “arms” that connect to the board) on old carts and just tape a new battery in place but that’s an approach for monsters and psychopaths.
I’m a bit foggy on the details but I think Pokémon Silver / Gold were a little trickier because the RTC changes the PCB layout and the battery is actually mounted on top of a chip, so space gets a little tight and you have to build a bit of a solder bridge up to the connectors.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: [email protected]
Welcome to the largest gaming community on Lemmy! Discussion for all kinds of games. Video games, tabletop games, card games etc.
Rules
1. Submissions have to be related to games
Video games, tabletop, or otherwise. Posts not related to games will be deleted.
This community is focused on games, of all kinds. Any news item or discussion should be related to gaming in some way.
2. No bigotry or harassment, be civil
No bigotry, hardline stance. Try not to get too heated when entering into a discussion or debate.
We are here to talk and discuss about one of our passions, not fight or be exposed to hate. Posts or responses that are hateful will be deleted to keep the atmosphere good. If repeatedly violated, not only will the comment be deleted but a ban will be handed out as well. We judge each case individually.
3. No excessive self-promotion
Try to keep it to 10% self-promotion / 90% other stuff in your post history.
This is to prevent people from posting for the sole purpose of promoting their own website or social media account.
4. Stay on-topic; no memes, funny videos, giveaways, reposts, or low-effort posts
This community is mostly for discussion and news. Remember to search for the thing you’re submitting before posting to see if it’s already been posted.
We want to keep the quality of posts high. Therefore, memes, funny videos, low-effort posts and reposts are not allowed. We prohibit giveaways because we cannot be sure that the person holding the giveaway will actually do what they promise.
5. Mark Spoilers and NSFW
Make sure to mark your stuff or it may be removed.
No one wants to be spoiled. Therefore, always mark spoilers. Similarly mark NSFW, in case anyone is browsing in a public space or at work.
6. No linking to piracy
Don’t share it here, there are other places to find it. Discussion of piracy is fine.
We don’t want us moderators or the admins of lemmy.world to get in trouble for linking to piracy. Therefore, any link to piracy will be removed. Discussion of it is of course allowed.
The adapter I shared has no solder except that which you put into it. It solders into place just fine with a little flux, I’ve had 0 issues in ~20 games from this.
Be sure to clean your iron tip, I had a little bit of difficulty on the first one I did because I have had the same iron tip for like 10 years. A $2 replacement made life much easier. Probably also could have just hit it with sand paper. And double-check polarity on the connection points - watch a couple of YouTube videos to confirm you’ve got +/- right. I think it’s wonky on some carts.
The ones that are soldered and often suck are the ones OP posted. Be sure to check the battery voltage before you install those ones because they use cheap batteries and duds are common.
I’ve also seen people go the cave man approach and just un-solder/pry off only the battery (from the attached “arms” that connect to the board) on old carts and just tape a new battery in place but that’s an approach for monsters and psychopaths.
I’m a bit foggy on the details but I think Pokémon Silver / Gold were a little trickier because the RTC changes the PCB layout and the battery is actually mounted on top of a chip, so space gets a little tight and you have to build a bit of a solder bridge up to the connectors.
Fun, I have to change the batteries for my Pokémon gold and silver. Thanks for the heads up, I will use fresh tips and borrow a multi-meter.